|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
April 8th, 2007, 20:44
|
#1 |
|
TM M14 Trigger Guard Problem
Hey guys,
A while ago i took apart me M14 to put a bipod adapter in it. When I put everything back together the trigger guard will not lock into place. It goes all the way in but wont lock in place. I'm not sure if it's a part missing or what as it does not appear anything is missing. So for now it's zip tied into place until I can get this figgered out. Any help would be greatly appreciated
__________________
If I was banging all of them, I'd be a manwhore. At the moment, I'm just an opportunist. 
|
|
|
|
April 10th, 2007, 00:42
|
#2 |
|
GBB Whisperer
|
That metal is fairly malleable.
Bend it back in to shape by lengthening the trigger guard. ie, the part that clips in to the stock... pull it out a bit. In natural state, it should sit outside of the hole, requiring a bit of force to bend it in far enough to push back in to the stock. Hope that made sense. |
|
|
|
|
April 10th, 2007, 02:32
|
#3 |
|
|
Yup made perfect sense and worked. Thanks Brian!
__________________
If I was banging all of them, I'd be a manwhore. At the moment, I'm just an opportunist.
|
|
|
|
|
April 10th, 2007, 02:45
|
#4 |
|
yep, it actually hooks onto a fairly solid looking hook thing on the motor bracket. i can't see it ever breaking.
__________________
experienced toronto gun doctor, hundreds of guns serviced manchovie gun doc thread! my b/s rating |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
