Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

TM AUG 500 fps setup..

:

Doctor's Corner

Reply
 
Thread Tools
Old May 20th, 2007, 13:59   #1
DYORD
 
Join Date: Jan 2007
Location: Philippines
TM AUG 500 fps setup..

Just replaced my stock TM hop-up rubber with prometheus red hard-type. Still can't get a good groupings of bb's.

My setup before is just SP120 and the accuracy is veery good.. Just wondering why i can't get a good accuracy with my 500 fps setup..

Anyway.. barrel is still on stock. I tried firing my AEG on a pizza hut box on just 10 meters away... and the groupings is like 8 inches in diameter...

REALLY BAAD!!

anyone help pleasE!!
__________________
MORE FPS :banghead:
DYORD is offline   Reply With Quote
Old May 20th, 2007, 14:01   #2
The Saint
 
The Saint's Avatar
 
Join Date: Jan 2005
Location: Quebec
What weight of BBs are you shooting?
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."
The Saint is offline   Reply With Quote
Old May 20th, 2007, 14:09   #3
dontask
 
Join Date: Jan 2006
Location: Vancouver
Send a message via MSN to dontask
theoretically at higher speeds, bbs are more easily to be thrown off course especially in a stock barrel
either get a tightbore or just as The Saint mentioned use heavier bbs for the time being
dontask is offline   Reply With Quote
Old May 20th, 2007, 14:13   #4
Kokanee
Ministry of Peace
 
Kokanee's Avatar
 
Join Date: Mar 2002
I tried running a prom hard red hopup in my TM M14, and it was so off-spec that bbs wouldn't even get past the lip of the rubber, they would get stuck there.
Kokanee is offline   Reply With Quote
Old May 20th, 2007, 15:55   #5
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
Quote:
Originally Posted by Kokanee View Post
I tried running a prom hard red hopup in my TM M14, and it was so off-spec that bbs wouldn't even get past the lip of the rubber, they would get stuck there.
That happens with hard type rubbers, if you aren't shooting enough energy. Typically, those hard packings are meant for 425+fps setups.

DYORD, what weight BBs are you using? At that velocity, you would HAVE to be using 0.30g or heavier BBs to maintain stability.
ILLusion is offline   Reply With Quote
Old May 20th, 2007, 16:44   #6
Jimski
 
Jimski's Avatar
 
Join Date: Jun 2005
Location: Montreal
DYORD, what battery do you use and where do you stuff it ?
just curious...

thx
Jimski is offline   Reply With Quote
Old May 20th, 2007, 17:41   #7
dontask
 
Join Date: Jan 2006
Location: Vancouver
Send a message via MSN to dontask
Quote:
Originally Posted by Jimski View Post
DYORD, what battery do you use and where do you stuff it ?
just curious...

thx
+1
dontask is offline   Reply With Quote
Old May 21st, 2007, 13:06   #8
DYORD
 
Join Date: Jan 2007
Location: Philippines
I'm using .28g bb's.. Well.. it's somehow cheaper than .3's.. But many people told me that .28 should be fine. I've seen people with 600fps uses .25 and the groupings are fine.

About my battery.... I'm using Sanyo NiCAD 9.6v 2400mah Sub C battery. I have a battery pouch attached on the stock butt of my AUG.
__________________
MORE FPS :banghead:
DYORD is offline   Reply With Quote
Old May 21st, 2007, 14:54   #9
Jimski
 
Jimski's Avatar
 
Join Date: Jun 2005
Location: Montreal
Quote:
Originally Posted by DYORD View Post
About my battery.... I'm using Sanyo NiCAD 9.6v 2400mah Sub C battery. I have a battery pouch attached on the stock butt of my AUG.
ok thx

I personally find this solution to be too bulky for me.
I'm trying to attach my battery (10.8 4400 subC) in a pouch beside the receiver's rail.
i'll send pics when it's done...
Jimski is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 02:52.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.