|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 30th, 2007, 21:59 | #1 |
TM M16 A2 handle
Hey guys, this could be a simple fix but im not to familiar with my gun. the handle on my gun is loose jus tthe plastic frame part and im not quite sure how to tighten it i llooked at the diagram but i just dont see it. like i said its probably simple help would be very much apreciated.
Thanks guys, Marcus.
__________________
M16A2 :tup: <a href="http://www.sloganizer.net/en/" target="_blank" title="Sloganizer - the slogan generator"><img src="http://www.sloganizer.net/en/style3,Chuck-spc-Norris.png" border="0" alt="generated by sloganizer.net" title="This slogan was generated by sloganizer.net"/></a> |
|
June 12th, 2007, 00:41 | #2 |
Anyone?
__________________
M16A2 :tup: <a href="http://www.sloganizer.net/en/" target="_blank" title="Sloganizer - the slogan generator"><img src="http://www.sloganizer.net/en/style3,Chuck-spc-Norris.png" border="0" alt="generated by sloganizer.net" title="This slogan was generated by sloganizer.net"/></a> |
|
June 12th, 2007, 00:55 | #3 |
A Total Bastard
|
this is your handgrip if so you will have to remove the motor and tighten the 2 screws holding it to the mechbox. use a long star screwdriver.
Last edited by testtube; June 12th, 2007 at 01:07.. |
|
Bookmarks |
|
|