KA 6 pos stock

[fps_boy]

Sorry if this is in the wrong section, Please move if it is.
Hey I'm wondering if this stock will fit on my gun, I have an ICS m4a1.

I'm looking into getting this stock for my gun down the road, I don't really like the full stock.

Stocks - King Arms


KA-STOCK-05BKB
King Arms 6 Position Stock ( Black / Pipe With Marking ) In Stock US$65.00




Outer Barrel for AEG - King Arms


KA-OB-02
Kings Arms 10.5 Inch Outer Barrel In Stock US$49.00


Sights - King Arms


KA-FS-03B
King Arms PRI Flip Up Sight ( Type B ) In Stock US$48.50



I have this front end on my gun right now M4 Free Float M.R.E. RAS Kit. I'm looking at getting the outer barrel listed above. I'm not sure if this will fit and take my front flip up sight because the 10.5 inch has to grooves at the bottom and the barrel I have has two rings grooved into it. The sight is the one with the bolts not the pins. I have also shortened up the ras.


Thanks.

EDIT: Oh yeah this is what the ras has been shortend to.

[mcguyver]

Put a crane stock on that gun if you want retractable. You would need to rewire the gun for front battery (and you'd need a PEQ/battery box as well), which I don't recommend you to do.

ICS lower gearboxes are very fussy as to disassembly/reassembly and it's not for a beginner.

I can't believe you chopped the MRE. Sacrilege!!!!

BTW, all the nice stocks you like that are meant for Marui, G&P, etc will not work on an ICS stock gun. They use a screw that goes into the spring guide, and you can't do that with ICS. ICS makes a stock adapter to adapt their guns to these stocks and you'll need to buy one of those to do the job, or else do some custom machining to make threads on the stock tube and use a short scew.

The stock adapter is easier.

[fps_boy]

Right before I butchered the front end all I could think of was oh god, here it goes, and Mcguyver is going to kill me.


Stocks - ICS


ICS-ACC-LETS
ICS LE Tactical Stock for ICS M16 Series In Stock US$53.00

I must have over looked this.
I think this would be easier than getting the adapter and probably cheaper.
And I was thinking for the battery situation to just get a battery bag.

[mcguyver]

That picture is wrong. That's not an ICS stock. ICS uses a different mounting system than other brands. Doing a battery bag will require you to drill a hole through the side of the stock tube. A crane stock with the ICS adapter will look cleaner and not leave you with exposed wiring.

ICS stocks do not have a screw that extends through the stock tube. If you order it, it will look a little different.

[fps_boy]

With the crane stock, I'm wondering If I will have to buy new batteries?

[fps_boy]

I'm going to order a G&P crane stock for my ICS m4 but I can't find the ICS stock adapter anywhere, could someone tell me where I can buy this?

[mcguyver]

I might know where there is one. I'll let you know tomorrow.

[fps_boy]

Yay.