m15a4 barrel removal

[m15a4master]

I am looking to remove the outer barrel on my m15a4 and converting it to a compact sniper. How do I remove the outer barrel?

[medhatboy]

you need a special wrench to loosen the delta ring nut.
http://www.uncompany.com/pageproduct...sp?prodid=7677

[Naglfar]

Is that just on CAs that you need the wrench? On my TM knockoff you can just twist it with your hands (a bit tight but still comes).

[ILLusion]

G&P setups use the same tool. CA, King Arms & G&P front ends closely replicate real steel.
TM is a poorly re-engineered copy, hence the barrel wobble issues.

[m15a4master]

them sumbitches classic army, thats why all the other guides didn't work thanks.

[ILLusion]

You think it's a bad thing that they copied the real thing? Lol.

[m15a4master]

naw just it took too long for me to find out.

[Trader 762]

So if I am not mistaken then, if CA Armalites will take real parts, namely the rear stock adapter for a single sling mount should fit right?

The nest question is, how to remove and install. :s

http://www.bravocompanyusa.com/Singl...ual%20hook.htm

[JeSteR52]

If you're looking to take the delta ring nut off and don't want to spend 20-some-odd dollars on a stupid wrench, just use a pair of channel locks. Worked for me :P

[Zeta]

Or put two post pin into those holes and stuck a screw driver in there, then twist. I saw someone did it before, but I don't know where he got thost pins.

Hope it help

[Crunchmeister]

Originally Posted by JeSteR52

If you're looking to take the delta ring nut off and don't want to spend 20-some-odd dollars on a stupid wrench, just use a pair of channel locks. Worked for me :P

+1. That's what I've used on my guns as well and never had an issue. Vise grips work too as long as you don't use crushing force.

[AngelusNex]

anybody else notice the date on the last post before the necro?