|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
August 20th, 2007, 10:42 | #1 | |
KWA to release "LiPo-ready" M4
http://www.kwausa.com/news/news_082007.html
Rosemead, CA – August 20, 2007 KWA USA today announced it is in the final stages of releasing it’s first Lithium Polymer (LiPo) ready AEG, the KWA KM4A1 Carbine. The new AEG was engineered specifically to take full advantage of today’s advanced battery technology and provide airsoft enthusiasts with the experience of absolute performance. Lithium Polymer (LiPo) batteries provide higher capacity and superior performance surpassing the more commonly available Nickel Cadium (NiCd) and Nickel Metal Hydride (NiMh) batteries. However, using the LiPo power source requires the highest quality of internal components. To handle the extra power of LiPo batteries, the KM4A1 is equipped with a reinforced metal gearbox utilizing KWA’s exclusive 8 and 9 mm ball bearing bushing combination and case hardened, precision metal gear sets. Heavy duty springs and high-speed motors are matched for optimum results. High-grade metal alloy are used for the production of the upper and lower receivers. The KWA KM4A1 is capable of firing more than 20 rounds per second and well over 400 feet per second when powered by an 11.1v Lithium Polymer battery. The decision to develop LiPo-Ready products came after the successful introduction of KWA’s high performance AEG, the KG36C. Positive feedbacks and overwhelming demands from the industry accelerated the engineering of an AEG capable of utilizing the LiPo power source. The KWA KM4A1 will be released in the US in mid September 2007 and will only be available through KWA USA Authorized Resellers. Suggested retail price for the KWA KM4A1 Carbine will be $359.95. Note - pics below are of a pre-release model given to an airsoft writer for review. He reports it chrono'd at a steady 424 fps right out of the box, and ran very smooth on the supplied 11.1 volt LiPo pack. About KWA USA KWA USA is the exclusive North America importer and master distributor for KWA products. Based in San Gabriel Valley, California, KWA USA is dedicated in providing high performance products and exceptional services to the North American airsoft industry. For information: http://www.kwausa.com Contact: sales@kwausa.com Phone: 1-626-453-8373
__________________
Quote:
Last edited by Skruface; August 20th, 2007 at 14:30.. |
||
August 20th, 2007, 21:24 | #2 |
hmm, ive never heard of 9mm bushings.. so.. any chance of it blowing up in your face :P
|
|
August 20th, 2007, 21:43 | #3 |
I WANT ONE!!!
__________________
No Comment. |
|
August 20th, 2007, 21:56 | #4 |
kos
|
mmm...another V2. Yay!
|
August 20th, 2007, 22:19 | #5 |
August 20th, 2007, 22:40 | #6 |
Sorry but I dont wanna go through 12K in guns before I finally decide to sell them all and buy a 3k gun.. Now only if you made your decision sooner you would have all that leftover cash to play with.. Oh well..
__________________
No Comment. |
|
|
Bookmarks |
|
|