|
|
|
August 29th, 2007, 02:47
|
#1 |
|
HFC M190 Slide Lock Problem
I have a HFC M190 and when the BBs are out the slide doesnt lock back... can any one help me?
|
|
|
|
|
August 29th, 2007, 02:50
|
#2 |
|
*AV Status Suspended pending trade resolution*
|
Probably cooldown. Did you empty the magazine quickly or fire many rounds fast before it was empty? My M190 did that.
If not, grip problems aren't unheard of, if you've taken them off.
__________________
Age verifier- Halifax region |
|
|
|
|
August 29th, 2007, 02:54
|
#3 |
|
i dont think so because it still doesnt lock back right when i first shoot it.
|
|
|
|
|
|
August 29th, 2007, 03:04
|
#4 |
|
Remove your slide and check your slide lock. If part of it is missing or worn down then that would be your problem.
|
|
|
|
|
August 29th, 2007, 03:12
|
#5 |
|
another thing is that the slide will lock back once and a while but not every time and if i shoot the gun pointing down the slide will lock back.
|
|
|
|
|
|
August 29th, 2007, 03:15
|
#6 |
|
There's a spring under the left-side grip. If you've removed the grip and the spring is missing, not in the guide on the slide lock or on the frame, then this will happen.
Make sure that spring is installed properly.
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
|
|
|
August 29th, 2007, 03:17
|
#7 |
|
k ill try that
|
|
|
|
|
|
August 29th, 2007, 03:24
|
#8 |
|
i cant seem to get the left handgrip off
|
|
|
|
|
|
August 29th, 2007, 03:25
|
#9 |
|
sry nvm got it
|
|
|
|
|
|
August 29th, 2007, 03:36
|
#10 |
|
And it's fixed?
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
August 29th, 2007, 03:45
|
#11 |
|
just checking now ... had lots of trouble getting the spring back... is the slide lock supposed to push downwards or up
|
|
|
|
|
|
August 29th, 2007, 03:52
|
#12 |
|
nvm about the last post... if u oush the slide lock up then let it go the spring is supposed to bring it back down right?
|
|
|
|
|
|
August 29th, 2007, 03:52
|
#13 |
|
|
The spring is suppose to push it down. The magazine will push it up when it's empty, due to a small tab that's attached to the plastic BB "pusher" which is at the top of the magazine spring.
__________________
Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
August 29th, 2007, 03:54
|
#14 |
|
ok the spring is right but the slide still wont lock back.
|
|
|
|
|
|
August 29th, 2007, 03:56
|
#15 |
|
|
Is the slide recoiling all the way back when you fire it? What kind of gas are you using?
__________________
Airsoft Sales and Repair/Upgrade Services |
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
