|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
September 22nd, 2007, 01:26
|
#1 |
|
PTW: make semi-auto only
If you have a Systema PTW and you want to make it semi-auto only, with no ability to fire either burst or auto, to use, say, as a high-FPS sniper rifle or designated marksman rifle:
Cut the black wire that runs from the trigger to the EL-001 board (the larger of the two boards just forward of the gearbox). A less permanent mod would be to solder a small toggle switch into the black wire and flip the switch to enable/disable sniper mode. Enjoy!
__________________
 Systema PTW: It's not a gun, it's a religion. Last edited by WarChild7; September 22nd, 2007 at 01:41.. |
|
|
|
September 22nd, 2007, 02:03
|
#2 |
|
Scotty aka harleyb
|
Or block the selector plate with a little square of aluminum or something. It's more elegant because you won't even be able to switch to FA.
__________________
|
|
|
|
|
September 22nd, 2007, 02:21
|
#3 |
|
You can also use a small set screw to block the selector rack gear from moving. I believe this is what Systema does for semi-auto models, but it requires you to remove the gearbox from the gun. A little piece of metal will work there as well.
http://www.systema-ptw.com/Forum/for...TID=44&KW=semi 
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. Last edited by mcguyver; September 22nd, 2007 at 02:34.. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
