KJW M9 COMPLETE Reassembly

[ShirouKamui]

Anyone know where to find one? I followed an old thread regarding disassembly which said be careful when removing the halves on the internals. What they didn't say was how utterly impossible this is so now I have a pile of parts and only a general idea on what to do.

Any help is appreciated.

[Styrak]

What do you need help with, specifically?
I took apart and put back together 2 KJW M9's.

[icecold]

Hey, ahm im trying to tae out the internals so that i can replace my trigger spring but i cant pull them out...i removed the large dissasebly lever/pin thing and i unscrewed the large screw to the left of the hammer, but there is still something that the internals are attached to and i dont know what it is.... i think it might be a pin but I'm not sure which one it is...think its part #63, or #42. And if it is any of those pins, how do i remove them? Plz help!

[Styrak]

You also have to remove the mag catch and the trigger bar.

[icecold]

How exactly do i remove the trigger bar? The mag catch fell out when i removed the hand grips. Thanks in advance.

[Styrak]

You should just be able to pull out the trigger bar, if I remember correctly. If you're not sure what I'm taking about, i mean the part that connects the trigger to the hammer outside most of the frame, part of it is under the right hand side grip.

[Drake]

http://tech.airsoftcanada.com/

Parts diagrams of quite a few guns. The KJW M9 is in there.

It's not that hard to figure out, although from experience a few components may require trial and error. Consider it a learning experience. It's actually quite gratifying once you manage to figure it out for yourself and have a working gun in your hands.

[Stealth]

http://www.airsoftcanada.com/showthr...ht=disassembly

See if this helps.