|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
November 21st, 2007, 21:10
|
#1 |
Overpowered AEG with a Prometheus MS110SP?
The AEG:
CA G36K Systema 6.04 Inner barrel. Prometheus Hop-up sleeve and bucking. Guarder Cylinder kit (with polycarbonate piston, not aluminum) Prometheus MS110SP spring (turquoise) Prometheus metal spring guide Coke can test with .20 bbs and hop-up turned on: I get thru both sides, bottom middle and bottom edge. I thought I would have remained below 400fps with a Prometheus MS110SP. Is this normal? I guess I'll have to test it with a chronograph to be certain. |
|
|
|
|
November 21st, 2007, 21:11
|
#2 |
|
I've had MS110 springs in the 400-410 area in an M4, and the MS100 at about 360-370 with 0.20g.
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
|
|
|
November 21st, 2007, 21:23
|
#3 |
|
Ah crap...I thought I would not have needed to open that damn V3 mechbox for a long time. I guess I'll go with the MS100SP.
My TM M4A1 has basically the same parts, except with a PDI 140% instead of the Prometheus MS110SP, and it shoots below 400fps. |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
