KSC G17 problem

Goodl2ussian · November 29th, 2007, 01:48

Hey got my new G17 with the metal slide...problem is I cant get the slide to rack back nor can i take the slide off =\

Styrak · November 29th, 2007, 02:17

It's just stuck? Doesn't move at all?

Goodl2ussian · November 29th, 2007, 13:37

i can slide it back like....less than a CM. When i try to take it off it moves forward about 2 - 3 cm

Styrak · November 29th, 2007, 15:01

Wow. You're kinda screwed there. If you could slide it back, you could stick a screwdriver in through the ejection port and depress the hammer, which might be the problem. If you can't even slide it back....I don't know.

Goodl2ussian · November 29th, 2007, 15:08

.........goddamit! aite thanks. *sigh* i guess ill try sliding it back like i did last time.

CDN_Stalker · November 29th, 2007, 15:20

Take the magazine out first. Lol

I'm actually baffeld by this as well.

Goodl2ussian · November 29th, 2007, 15:22

i cant take the slide off...thats the problem. I somehow was able to rack it back once and that was it. The hammer was cocked i pulled the trigger and it decocked. Now it wont budge =(

CDN_Stalker · November 29th, 2007, 15:28

I made a typo, I meant take the mag out (I editted it).

Is it safe to assume that your hammer is cocked? If so, put a small screwdriver into the rear of the slide (there is a square hole in the plastic endcap) and press the hammer down, then try to get the slide to move forward. If the hammer isn't cocked, then you'll have to try to cock it then do the above.

Goodl2ussian · November 29th, 2007, 15:31

mag isnt in. lol im not that dumb XD but ill try that thank you Stalker. I was looking at the plastic part to see if i could remove it but ill try your suggestion.

Thing is...after i racked the slide back once i pressed the trigger and I heard a click, which I imagine is the hammer deperessing? Problem is..how do i cock it if i cant rack the slide back ?

CDN_Stalker · November 29th, 2007, 15:36

That plastic part only comes out if you remove the blow back inside the slide.................. and you need to take the slide off to get it out.

BTW, I was kidding about your mag causing the problem. It only prevents the slide from coming off.

Goodl2ussian · November 29th, 2007, 15:52

ahaha no i know i didnt take it seriously. This sucks! lol

Okay. so if i try to remove the slide, itll slide forward about 2cm's and then the plastic part gets caught on some metal thing which to my understanding is the hammer. My question is, how exactly do i press the hammer down lol i found the hole and everything

CDN_Stalker · November 29th, 2007, 15:59

If the plastic thing is getting caught on the hammer, then put your scredriver in as best as you can and pull the hammer down until it locks. Then you should be able to get the slide off. Starting to sound like you are having a slide retraction problems more than just trying to get it off. It won't come off with the hammer in the rest position.

Goodl2ussian · November 29th, 2007, 16:58

So.....the problem is now fixed. I just simply flipped the pistol upside and smacked it on a calculus book. Thanks for all your help guys

CDN_Stalker · November 29th, 2007, 17:00

Wow, never thought a GBB would be threatened by a math book. Good stuff, I'll have to go buy one to use for GBB repairs. Thanks for the tip! Lol

Goodl2ussian · November 29th, 2007, 17:05

haha yea who woulda knew. Jayhad told me to try I was a tad doubtful but felt like it would work so...there we go!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 29th, 2007, 01:48	#1
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	KSC G17 problem Hey got my new G17 with the metal slide...problem is I cant get the slide to rack back nor can i take the slide off =\

November 29th, 2007, 02:17	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	It's just stuck? Doesn't move at all? __________________ Airsoft Sales and Repair/Upgrade Services

November 29th, 2007, 15:01	#4
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Wow. You're kinda screwed there. If you could slide it back, you could stick a screwdriver in through the ejection port and depress the hammer, which might be the problem. If you can't even slide it back....I don't know. __________________ Airsoft Sales and Repair/Upgrade Services

November 29th, 2007, 13:37	#3
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	i can slide it back like....less than a CM. When i try to take it off it moves forward about 2 - 3 cm

November 29th, 2007, 15:08	#5
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	.........goddamit! aite thanks. sigh i guess ill try sliding it back like i did last time.

November 29th, 2007, 15:20	#6
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Take the magazine out first. Lol I'm actually baffeld by this as well. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871 Last edited by CDN_Stalker; November 29th, 2007 at 15:26..

November 29th, 2007, 15:22	#7
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	i cant take the slide off...thats the problem. I somehow was able to rack it back once and that was it. The hammer was cocked i pulled the trigger and it decocked. Now it wont budge =( Last edited by Goodl2ussian; November 29th, 2007 at 15:27..

November 29th, 2007, 15:28	#8
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	I made a typo, I meant take the mag out (I editted it). Is it safe to assume that your hammer is cocked? If so, put a small screwdriver into the rear of the slide (there is a square hole in the plastic endcap) and press the hammer down, then try to get the slide to move forward. If the hammer isn't cocked, then you'll have to try to cock it then do the above. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

November 29th, 2007, 15:31	#9
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	mag isnt in. lol im not that dumb XD but ill try that thank you Stalker. I was looking at the plastic part to see if i could remove it but ill try your suggestion. Thing is...after i racked the slide back once i pressed the trigger and I heard a click, which I imagine is the hammer deperessing? Problem is..how do i cock it if i cant rack the slide back ? Last edited by Goodl2ussian; November 29th, 2007 at 15:34..

November 29th, 2007, 15:36	#10
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	That plastic part only comes out if you remove the blow back inside the slide.................. and you need to take the slide off to get it out. BTW, I was kidding about your mag causing the problem. It only prevents the slide from coming off. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

November 29th, 2007, 15:52	#11
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	ahaha no i know i didnt take it seriously. This sucks! lol Okay. so if i try to remove the slide, itll slide forward about 2cm's and then the plastic part gets caught on some metal thing which to my understanding is the hammer. My question is, how exactly do i press the hammer down lol i found the hole and everything

November 29th, 2007, 15:59	#12
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	If the plastic thing is getting caught on the hammer, then put your scredriver in as best as you can and pull the hammer down until it locks. Then you should be able to get the slide off. Starting to sound like you are having a slide retraction problems more than just trying to get it off. It won't come off with the hammer in the rest position. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

November 29th, 2007, 16:58	#13
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	So.....the problem is now fixed. I just simply flipped the pistol upside and smacked it on a calculus book. Thanks for all your help guys

November 29th, 2007, 17:00	#14
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Wow, never thought a GBB would be threatened by a math book. Good stuff, I'll have to go buy one to use for GBB repairs. Thanks for the tip! Lol __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

November 29th, 2007, 17:05	#15
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	haha yea who woulda knew. Jayhad told me to try I was a tad doubtful but felt like it would work so...there we go!

KSC G17 problem

Doctor's Corner