|
|
|
January 31st, 2008, 14:55
|
#1 |
|
Banned
|
G&P Marine body Problem
On the marine body the dust cover i am having problems..
i got the rod and the washer thing that helps it not slide out and the cover itself..but there is a circle thin thing with it and i have no clue where it goes..it doesnt seem like a magnet it dont stick to metal or anything..help guys |
|
|
|
January 31st, 2008, 14:58
|
#2 |
   Join Date: Feb 2005
Location: Swimming in a pool of Xpresspost receipts.... Toronto - 400/401
|
It's an e-ring, it goes into the groove in the rod after you've installed it, prevents the rod from sliding off by itself.
__________________
|
|
|
|
|
January 31st, 2008, 15:00
|
#3 |
|
Banned
|
i know that but its something else the e ring is already around the pipe thing
|
|
|
|
|
January 31st, 2008, 15:05
|
#4 |
|
One e-ring is fixed, and the other you install on the other end of the rod once you get everything together.
__________________
|
|
|
|
|
January 31st, 2008, 15:06
|
#5 |
|
My G&P Marine dust cover doesn't have a magnet either. It's for the best anyways. You really don't want that open when you're playing anyways to keep unwanted substances out. As for that thin circle thingy...???
Can you slide your dust cover side-to-side? It maybe a spacer to prevent that. Only thing I can think of what it is.
__________________
|
|
|
|
|
January 31st, 2008, 15:08
|
#6 |
|
Banned
|
how does the dust cover stay closed then if it has nothing on it
|
|
|
|
|
January 31st, 2008, 15:09
|
#7 |
|
|
The spring holds it closed. Your kit should have came with a small spring that is installed on that rod.
__________________
|
|
|
|
|
January 31st, 2008, 15:13
|
#8 |
|
Banned
|
mine doesnt even stay closed
|
|
|
|
|
January 31st, 2008, 15:26
|
#9 |
|
|
This maybe a stupid question, but did you install the spring properly? You have to wind the spring abit.
__________________
|
|
|
|
|
January 31st, 2008, 15:29
|
#10 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Ya you didn't put the spring on properly lol
|
|
|
|
|
January 31st, 2008, 18:02
|
#11 |
|
Banned
|
what u mean wind it what do i gotta do thanks guys
|
|
|
|
|
January 31st, 2008, 18:54
|
#12 |
|
Banned
|
like i only thought u put the spring on how do u wind it..thanks guys for your help cant wait to show u the gun when its complete
|
|
|
|
|
January 31st, 2008, 19:03
|
#13 | |
|
Quote:
Last edited by zone 69; January 31st, 2008 at 19:09.. |
||
|
|
|
|
January 31st, 2008, 19:27
|
#14 |
|
Banned
|
no it was for the dust cover
|
|
|
|
|
January 31st, 2008, 19:33
|
#15 |
 E-01
|
G&P metal bodies usually come with a small instruction sheet with pictures of how to disassemble your old receiver and re-assemble the new one. None of this should be a mystery.
You installed the spring for the dust cover "wrong", i.e., you didn't wind the spring to put tension on it, so it's just sitting there. Personally, I hate seeing ARs being used with the dust cover closed, so I swap mine out for the "always open" realistic-looking ones. The small magnet-looking disc is a cover for the fake fire selector (on the right side of the receiver): see picture #45 in your instruction sheet. (you have to glue it on, btw)
__________________
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
