KSC G18C Refuses to fire! Help please.

[DrakeHighlander]

Hi.

I just recently received a KSC G18C and after filling the magazine up with gas and spending one magazine, I went to fire with the now reloaded magazine (I'm waiting on more mags), and just the 'click' noise of the trigger without any firing. Disassembling it, I found no jams or anything. I've made sure that the magazine was full of gas, so that's not the problem. Anyone have an idea? Thanks in advance.

[ironskull79]

Is the safety on? That's my guess...

[Styrak]

There's no safety on a Glock.

You ARE cocking it again right?

[DrakeHighlander]

There's no safety, just the middle 'disassembly' position of the fire selector.

When the slide is pulled back, the selector switches back to this position. Therefore, I've concluded that something is wrong with the fire selector assembly. Anyone have some insight?

[Renegade)]

Potential broken firing pin(valve knocker)

[Daiviet]

is it a brand new glock or has it been fairly used in the past?
you're hearing the click noise, so it can't be resetting itself fully to the safe position. Try pushing the slide forward just a bit more, sometimes its a bit finicky that way.

[CDN_Stalker]

When moving the selector switch, you DO pull the slide back a bit to make the selector travel all the way and lock in place, right? It doesn't do that with the slide full forward.

[DrakeHighlander]

It's brand new. I'm getting the feeling that something inside is broken.

Again, pulling the trigger makes a click noise, and the fire select switch returns to the middle position. If you just cock without pulling the trigger, the selector switch moves around (which I'm assuming you shouldn't be able to do).

[Qlong]

I have the same problem when I select auto, release the slide, it gets knocked back to the middle position.

[Daiviet]

yea, you may have to disassemble it fully and check around for anything that looks broken. doesn't sound like a good thing especially if its new.

[seventhsealairsoft]

are you shooting it in the cold?

[DrakeHighlander]

I've disassembled it and I couldn't find the problem. I guess I'll have to wait out and see if anyone else can figure out what the problem is.

Also, no, I was shooting it inside at room temperature.

[Steve_U1S]

There's a set-screw hidden under the rear sight - it's a retainer for the pin that shows at the back side of the slide, to the left of the rear surface.
That's part of the doohickeys that keep tension on the select-fire lever. You might find that this is loose, and needs to be snugged up.
G18Cs come with the right hex key in the box, but if not, I /think/ I remember that as being a 0.9mm key.

Hope that leads you in the right direction...

[Barf]

Maybe you hurt it's feelings

[BrickHouse]

In the future,
never disassemble or "MOD" any new AEG or Pistol if problems arise out of the box, it will void any warranties and return possibilities you may have with your provider.

Furthermore if bought through personal sale always discuss what will be done if problems arise.

Personally I would have just sent it back, or called the person who sold the item A.S.A.P. to make arrangements.

Fixing something you have bought new should fall on the seller!