m3 tri nozzle and packing

Buds and Suds · April 8th, 2008, 22:11

Took my m3 apart and the top nozzle is warped and one barrels packing is deformed slightly. After hours of dedicated searching and finding dead ends for parts I figured I would just ask. Where do I find these parts? I tried every retailer I could think of and searches which just lead me to dead ends.

The Saint · April 8th, 2008, 22:16

Contact leonardinjapan (at) hotmail (dot) com, he does OEM parts from Japan.

Buds and Suds · April 9th, 2008, 02:33

That hard to get parts eh? You'd hope TM would release all future M3's without such a design flaw.

The Saint · April 9th, 2008, 12:34

You'd hope that TM would release updated metal versions of all their shotties while they're at it, but no such luck either.

Buds and Suds · April 11th, 2008, 18:01

Sent a few e-mails, recieved no positive results. The e-mail I sent the above mentioned person still goes unanswered. Im going to try to fix the nozzle as per infernos web page instructions, but that still leaves me with my hop up rubber needing a replacement. Is there a manufactuers web site for TM parts I can contact? WGC, UNcompany and some other big names dont carry this part or the nozzles.

The Saint · April 11th, 2008, 18:03

Try the above address as a MSN contact. He's on fairly regularly.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 8th, 2008, 22:11	#1
Buds and Suds Trader rating Join Date: Sep 2007 Location: edmonton	m3 tri nozzle and packing Took my m3 apart and the top nozzle is warped and one barrels packing is deformed slightly. After hours of dedicated searching and finding dead ends for parts I figured I would just ask. Where do I find these parts? I tried every retailer I could think of and searches which just lead me to dead ends.

April 8th, 2008, 22:16	#2
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Contact leonardinjapan (at) hotmail (dot) com, he does OEM parts from Japan. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

April 9th, 2008, 12:34	#4
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	You'd hope that TM would release updated metal versions of all their shotties while they're at it, but no such luck either. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

April 9th, 2008, 02:33	#3
Buds and Suds Trader rating Join Date: Sep 2007 Location: edmonton	That hard to get parts eh? You'd hope TM would release all future M3's without such a design flaw.

April 11th, 2008, 18:01	#5
Buds and Suds Trader rating Join Date: Sep 2007 Location: edmonton	Sent a few e-mails, recieved no positive results. The e-mail I sent the above mentioned person still goes unanswered. Im going to try to fix the nozzle as per infernos web page instructions, but that still leaves me with my hop up rubber needing a replacement. Is there a manufactuers web site for TM parts I can contact? WGC, UNcompany and some other big names dont carry this part or the nozzles.

April 11th, 2008, 18:03	#6
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Try the above address as a MSN contact. He's on fairly regularly. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

m3 tri nozzle and packing

Doctor's Corner