|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
September 1st, 2008, 19:25 | #1 |
New hop-up packing?
Ok so i wana upgrade from my JG rubber to this:
http://cgi.ebay.com/Prometheus-Air-S...742.m153.l1262 Does anyone have a review or any info you could provide me with this selection? |
|
September 1st, 2008, 19:29 | #2 |
Do you have a problem with your current rubber? If not, don't replace it.
If it ain't broke... I've just seen a lot of people upgrading things when it's not necessary and won't provide any advantage. |
|
September 1st, 2008, 19:40 | #3 |
My current rubber is curving up when the hop up is turned off, and i have cleaned the barrel and the rubber and the loading chamber, so i figured i would just get a new one, their cheap anyway..
|
|
September 1st, 2008, 19:41 | #4 |
Official ASC Bladesmith
|
Soft type is for lower fps guns. If you are close to 400fps you'd want to use a harder type, or else you will be replacing your rubber every 6 months (depending on use of course).
|
September 1st, 2008, 19:50 | #5 |
that's not rubber's problem, it just means that the bucking and rubber is misasligned when it was installed.
|
|
September 1st, 2008, 20:50 | #6 |
I replace the rubber ever time I use it...... wait, wrong subject.
|
|
|
Bookmarks |
|
|