HFC m190 not working

[kelebay]

Ok, so I recently bought an HFC m190 full metal brand new, and today when i gassed up the mag, with propane, put a few drops of silicone oil on the mag spring, and loaded it it would only fire semi, but I have the select fire model, also sometimes it will not fire, but bb's will get pinched between the top portion of the barrel, and the slide. I have lubed all the parts the manual says to lube and have been searching google and ASC for a few hours but i cannot find the solution. Could it be a defective mag, or maybe i need a more powerful spring to return the slide to the regular position? Any help will be appreciated.

[Skladfin]

have you ever pulled the slide when it was on safe?

if you have, then it will have surely broke your Sears, and your full auto will never work ever again.

[kelebay]

no i havent, i have taken off the slide in semi though if this makes a difference, the more serious problem i think is the bb's getting pinched bettween the barrel and slide.

[Torque]

Sorry for the thread jack but, I've lost the autofire on mine too. Will I need to get a new slide or do they have replacment parts???