KSC G17 slide upgrade

[spputsninper]

HI all. A couple years ago I changed out the slide on my stock KSC G17 for the metal upgrade. Well after two years of it not cycling properly and all around headaches, I went to switch back to the original slide.

I managed to get most of the way there and noticed my potential issue, the 2 springs (part 23) were bent. I went to look for my instructions to see if i missed a trick for inserting the piece with the springs and can not find my instructions.

In Short , does anyone have a copy of the sllide upgrade instructions (or a url for a download) , or a hint on how to reassemble the slide with out warping the springs, once my new ones arrive.

thanks

[Styrak]

Try using a little thin tape (like clear tape) to hold the springs in while you put the blowback chamber into the slide. Just a cm or so wide strip across the middle to keep the springs in there.

Doesn't need to be removed, you can just leave it there. Don't use to much though or you'll jam up your slide.