Race Gun Thread

[the4thpower3]

I searched but I didn't see any official Race Gun Thread.
I saw a few nice APS race guns out here though.
Racing Maniac drew me to you guys.
And I've encountered a few CAPS guys on YouTube (good stuff btw).
I thought I might come say "hi" and bring a few pics too.

I've built a couple airsoft race guns in the past..but this is my latest.

[Duilin]

http://airsoftcanada.com/showthread.php?t=74800

[Shirley]

There is a thread for Race guns specifically.
Here.

http://airsoftcanada.com/showthread.php?t=74482

[pusangani]

Welcome! and that's one heck of a nice gun you have there mate, well done!

[jesster202]

i love the purple feed lips thoes are sick!

[ILLusion]

Hey man, welcome aboard.

Been following a lot of your youtube threads and seeing your posts across international forums for a while. Always impressed with your pistols.

Glad to see another Captain KK addict. I'm down that very addictive path as well with way too many dollars sunk in...

[Shirley]

Originally Posted by jesster202

i love the purple feed lips thoes are sick!

They're Shooters Design Feed lips. My stock one broke, and had to replace into the SD ones, and they're strong.

[Shirley]

the4thpower3 you love spending money don't you?
Even using expensive aluminum BBs..

[RacingManiac]

Originally Posted by Mr.Hitman

the4thpower3 you love spending money don't you?
Even using expensive aluminum BBs..

and stainless frame, and stainless magwell....etc

My favorite still has to be the magwell....you just don't see that on all the other racers out there...

[the4thpower3]

Thanks guys.
This is by far my favorite build.

Illusion - I think I've seen you on youtube as well (RealBriGuy ?)
I think I've seen Hitman on there too.

And yes, Hitman I love spending money
But I don't normally shoot with aluminum bb's (good eye though).
They are nice though .30g and they are 6mm +/- .01 (I've measured them).

Captain KK is getting more and more popular. I can wait to see more custom builds pop up I know I will be building more with him!

Oh, and here's a parts list. I think I've got everything on there.

Infinity SVI Custom 6 inch 2011 – Tokyo Marui Base

Designed by the4thpower3, Custom CNC’d by Captain KK @ ProG4

ProG4 Custom Slide 4.4” – 6061 T6 Aluminum
ProG4 Custom Compensator 1.6” – 6061 T6 Aluminum
ProG4 Cocking Handle - 6061 T6 Aluminum
ProG4 Outer Barrel Threaded (for Compensator) Marked .38 Super – 303S.Steel
ProG4 Guide Rod 2 Piece Full Length – 303 S.Steel
King Arms 150% Recoil & Hammer Springs
The4thPower3 Short Stroke – Nylon Bushing
ProG4 Breech & Piston Head – 6061 T6 Aluminum
ProG4 Loading Nozzle Spring
NineBall Floating Valve Spring
Shooters Design Loading Nozzle
Shooters Design Piston Head O-ring
Action Floating Valve – Aluminum w/ O-ring
TM Hop-Up Chamber
NineBall Hop-Up Rubber
PDI Inner Barrel 6.01mm (i.d.) 8.55mm (o.d.) 137mm (length) – SUS 304S.Steel
ProG4 Custom 6” Upper Frame – 303S.Steel
ProG4 Hammer Spur Type – 303S.Steel
ProG4 Hammer Strut – 303S.Steel
ProG4 Valve Knocker & Spring – 303S.Steel
ProG4 Sear – 303S.Steel
ProG4 Thumb Rest- 6061 T6 Aluminum
ProG4 Thumb Ambi Safeties (polished) – 303S.Steel
ProG4 Grip Safety (polished) – 303S.Steel
ProG4 Slide Stop – 303S.Steel
ProG4 Mag Release – 303S.Steel
Shooters Design SHPD Extended Mag Release Button - 6061 T6 Aluminum
ProG4 Trigger Bar – 303S.Steel
ProG4 Trigger – 6061 T6 Aluminum
The4thPower3 Trigger and Hammer Tuning
ProG4 SV Grip Logos – 6061 T6 Aluminum
TM Lower Frame – Grip
The4thPower3 Grip Texturing Scrolled
ProG4 Trigger Guard Screws – Steel
PDI Grip Screws - SUS 304S.Steel
Cape Magwell – Stainless Steel
ProG4 Mag Base Pads - 6061 T6 Aluminum
The4thPower3 TM Custom HighFlow Mag Valves
Shooters Design Mag Feed Lips

C-More Serendipity Red Dot Sight – 6MOA dot
Arredondo C-More Dot Module Hood & Switch Knob

[ILLusion]

Originally Posted by the4thpower3

Illusion - I think I've seen you on youtube as well (RealBriGuy ?)
I think I've seen Hitman on there too.

Yup. That's me. I should create some more vids of my guns... I barely even scratched the surface of my gun collection on youtube... lol

Originally Posted by the4thpower3

ProG4 Outer Barrel Threaded (for Compensator) Marked .38 Super – 303S.Steel

Are you sure it's 303? They usually make them from 304, which is harder and tougher.

Originally Posted by the4thpower3

ProG4 Thumb Ambi Safeties (polished) – 303S.Steel
ProG4 Grip Safety (polished) – 303S.Steel

Curious how you got these parts... I've been bugging them to do a production run for me and Captain KK keeps telling me they need to do some R&D before they can make it.

[Shirley]

I saw your gun pics on AAPS too, that's why it looks familiar. Yes, I am 001versace.

[the4thpower3]

ILLusion - Nice to see you around.
Do you have pics of your collection here (on ASC)?
I'm really not 100% sure about the barrel. Most machinist like himself use 303 for ease of machinability. He may have some parts that are in production that use 304, but non-production, or custom parts are 303.
He doesn't always give straight answers though.
Everything that is listed as ProG4 was from him.
He has been working on updating his website. He will have though parts listed soon.
But he may not want to sell you a "non-production" batch.

I really like your guys signature blocks.

[the4thpower3]

BTW. I only have 2 other guns at the moment. Here's a pic of them.

[jesster202]

I really personaly like the caspin with all the slots in the slide. It makes it look really slick, is that a coustom job or aftermarket bought?