Quiet/Silent motor thread

milehigh · March 13th, 2009, 19:00

So I've been doing a little research to find quiet motors. I've got an EG1000 pulling an m120 spring with double torque helical gears in between. I am fairly impressed with the sound level so far, but I wouldnt mind experimenting to reduce the sound even more.

Post your quiet motor setups or you results from attempts at finding a quiet motor!

coach · March 13th, 2009, 19:23

wrap your grip with dynamat as well as lay pieces on the lower receiver where the mechbox is. leaving cutout for your selector of course.

hope you have big hands cause it makes the grip quite thick. I've tried it with a small piece of B-Quiet that I cut off the roll for my trunk.

Styrak · March 13th, 2009, 19:25

The EG700 is more quiet than the EG1000, FYI.

milehigh · March 13th, 2009, 21:20

Quote:

Originally Posted by Styrak

The EG700 is more quiet than the EG1000, FYI.

That's what I have been reading.. I might have to try one out.

coach · March 13th, 2009, 21:27

it's also better for your high torque setup.

LUTNIT · March 13th, 2009, 22:44

I believe the EG700 has more torque even though its slower, as well as quieter.

I find that reducing motor noise doesn't make a difference in a game for what other players can hear. My TM M14 has a barely louder shot report than motor/gear noise, and its impossible to hear the shot report from more than 100 feet away when shooting on semi. People always talk about quieting guns by reducing motor noise because thats what they hear as the mechbox is right beside their head. The noise from a mechbox doesn't carry nearly as far as the report from the piston impact. Even a standard gun with average gear/motor noise levels, with a properly baffled silencer, will be next to impossible to locate when firing on semi. The only time you would have to worry about loud gears/motors is when really close to people but then you also have to worry about hearing foot steps, cloth brushing up against cloth, and even breathing so its kinda pointless.

If you really want to test a gun, don't fire it. Get someone else to fire it from 75-100 feet away and then listen.

Dragate · March 14th, 2009, 17:25

Hm less zipping sound of the gears always satisfies me

I've also heard eg700 is one of the quietest motors, and I'm about to get one. I can tell you how it sounds after I do (but it'll be a while), but they're only 40 bux so what the hay haha.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 13th, 2009, 19:00	#1
milehigh Trader rating Join Date: Dec 2006 Location: Victoria	Quiet/Silent motor thread So I've been doing a little research to find quiet motors. I've got an EG1000 pulling an m120 spring with double torque helical gears in between. I am fairly impressed with the sound level so far, but I wouldnt mind experimenting to reduce the sound even more. Post your quiet motor setups or you results from attempts at finding a quiet motor!

March 13th, 2009, 19:25	#3
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	The EG700 is more quiet than the EG1000, FYI. __________________ Airsoft Sales and Repair/Upgrade Services

March 13th, 2009, 19:23	#2
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot	wrap your grip with dynamat as well as lay pieces on the lower receiver where the mechbox is. leaving cutout for your selector of course. hope you have big hands cause it makes the grip quite thick. I've tried it with a small piece of B-Quiet that I cut off the roll for my trunk.

March 13th, 2009, 21:27	#5
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot	it's also better for your high torque setup.

March 13th, 2009, 22:44	#6
LUTNIT Trader rating Join Date: Dec 2005 Location: Ottawa	I believe the EG700 has more torque even though its slower, as well as quieter. I find that reducing motor noise doesn't make a difference in a game for what other players can hear. My TM M14 has a barely louder shot report than motor/gear noise, and its impossible to hear the shot report from more than 100 feet away when shooting on semi. People always talk about quieting guns by reducing motor noise because thats what they hear as the mechbox is right beside their head. The noise from a mechbox doesn't carry nearly as far as the report from the piston impact. Even a standard gun with average gear/motor noise levels, with a properly baffled silencer, will be next to impossible to locate when firing on semi. The only time you would have to worry about loud gears/motors is when really close to people but then you also have to worry about hearing foot steps, cloth brushing up against cloth, and even breathing so its kinda pointless. If you really want to test a gun, don't fire it. Get someone else to fire it from 75-100 feet away and then listen.

March 14th, 2009, 17:25	#7
Dragate Trader rating Join Date: Oct 2008 Location: Waterloo-Toronto-Ottawa	Hm less zipping sound of the gears always satisfies me I've also heard eg700 is one of the quietest motors, and I'm about to get one. I can tell you how it sounds after I do (but it'll be a while), but they're only 40 bux so what the hay haha.

Quiet/Silent motor thread

Upgrades & Modifications