JG m733 Upgrading body querry

[Fuurin Kazan]

Hey everyone. I browsed through the current posts, and may have missed if there was a similar problem.. Or I may have just been blind, so I apologize if this has been referenced before:

I've got a JG m733 and it came stock with a plastic body. I have taken it all apart, and purchaced a metal body. Once is all came apart, I noticed that there was a peice on the plastic body that didnt exist on the metal one. But it seems fairly important... Can anyone give me a heads up on why that is? It's my first time upgrading.

And if possible, how to remedy my problem? Thanks a bunch in advance for your time and effort.

The Bodies side by side

[Splashx]

Originally Posted by Fuurin Kazan

Hey everyone. I browsed through the current posts, and may have missed if there was a similar problem.. Or I may have just been blind, so I apologize if this has been referenced before:

I've got a JG m733 and it came stock with a plastic body. I have taken it all apart, and purchaced a metal body. Once is all came apart, I noticed that there was a peice on the plastic body that didnt exist on the metal one. But it seems fairly important... Can anyone give me a heads up on why that is? It's my first time upgrading.

And if possible, how to remedy my problem? Thanks a bunch in advance for your time and effort.

The Bodies side by side

Your JG m733 came with a 2 piece hop-up. That means 1 piece of your hop-up in attached to your barrel and the other end is screwed on the body (where you see 2 holes aligned)

Solution : buy a 1 piece hop-up. as simple as that

[huang]

Stock JG/TM M4 uses a two pieces hopup. The two pieces hopup is installed on the little platform in the plastic body. This piece of platform doesn't exist in metal body. You just need a one piece metal hopup.

Originally Posted by Fuurin Kazan

Hey everyone. I browsed through the current posts, and may have missed if there was a similar problem.. Or I may have just been blind, so I apologize if this has been referenced before:

I've got a JG m733 and it came stock with a plastic body. I have taken it all apart, and purchaced a metal body. Once is all came apart, I noticed that there was a peice on the plastic body that didnt exist on the metal one. But it seems fairly important... Can anyone give me a heads up on why that is? It's my first time upgrading.

And if possible, how to remedy my problem? Thanks a bunch in advance for your time and effort.

The Bodies side by side

[Fuurin Kazan]

Thanks for the ultra fast reply and solution to my problem guys. Really appreciated. I guess I have to find out where I get a 1 peice hopup now, lol.

[ujiro]

all over the place, any retailer who sells parts pretty much. just search for an M4/M16 hop up unit

[yuhaoyang]

airsoftparts
redwolfairsoft
velocityarms
capitalairsoft
ehobbyasia
wgcshop
ect ect.

What I would recommend.
http://www.airsoftparts.ca/store2/in...oducts_id=1348
http://www.airsoftparts.ca/store2/in...roducts_id=594
or of course you can go the cheap+free shipping route
http://velocityarms.ca/index.php?mai...bdffceb35ad61b

[BORDENSNIPER]

one piece hop up cannot be jsut dropped into the gun, You will need to cut out the platform holding the two piece hopup, moreover, u will need to cut into the front of the lower reciever so that when u slide ur top reciever oover the top, the hopup chamer fits through.

[yuhaoyang]

atleast read the initial post dude...