TM P226 Full Metal Upgrade

[Rock 'N' Roll Outlaw]

So I just got a Full Metal Upgrade for a TM P226. According to the seller its the action slide and frame. Now I have zero experience gutting a GBB entirely and knowing how finicky these can be, is there anyone that wouldn't mind giving me a play-by-play on how to do this?

[DarkAngel]

Ive done it b4 with my TM 226, Its fairly simple.
Unlike glocks where the trigger assembly is attached to the hammer assembly, you can remove the assemblies one at a time in seperate peices.

So long as you do not take apart the assemblies themself, its pretty simple. But if you do, I can help you reassemble it.

I PM'ed you with my contact #

Cheers,
DarkAngel

[RacingManiac]

The usual precaution is that to watch out for small springs.....

I've never done P226 though, both TM Glock and 1911/Hi-capa is pretty simple...

[Danke]

For some 226 kits you need to make a modification to the takedown lever. You need to mill out the groove that the little plastic retainer catch slips into.

[BloodSport]

Originally Posted by Danke

For some 226 kits you need to make a modification to the takedown lever. You need to mill out the groove that the little plastic retainer catch slips into.

You should not need to do this with the action kit.

[DarkAngel]

I helped him over the phone and the conversion is complete. Hes just missing two parts from the mag release assembly which hes gonna have to order.

[Rock 'N' Roll Outlaw]

Actually I found them lol. Flat black plate on flat black backing.....talk about good camo.

Im not gonna bother with that tonight though, I'll get back on her again tomorrow morning and if I require anymore help, I'll just PM ya DA. Thanks again for all your help and keep on rotting in the free world.

Mods feel free to delete this thread if need be.