|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 10th, 2009, 02:23 | #1 |
BOYI/D-Boys
Hello All,
where would BOYI/DBoys rank in comparison to ICS and G&G?
__________________
---------------------- The beatings will continue until morale improves |
|
June 10th, 2009, 02:25 | #2 |
Vicious MSPaint Wizard
|
Very dependant on the models compared.
|
June 10th, 2009, 04:59 | #3 |
Banned
|
ICS is the best.thats a trick that nobody knows that as a matter of fact ,gg and dboys commercially share the same internal parts only with different brands and production places.
|
June 10th, 2009, 15:23 | #4 |
It depends on what you want. Some ICS models run a split gearbox which is very nice but has a lower durability and smaller amount of upgrades that can be done on it. IMO they will still beat a boyi probably.
|
|
June 11th, 2009, 09:45 | #5 |
Also it depends on if you are getting a cansoft gun or a full metal all black gun because the cansoft ICS are worse than a cansoft G&G but for full metal its the other way around.
|
|
July 18th, 2009, 00:49 | #6 |
I was actually checking out the AKS-74U full metal that DBOYS makes. Has anyone gotten these yet? What would be a nice red dot scope to mount on it?
__________________
---------------------- The beatings will continue until morale improves |
|
July 18th, 2009, 00:50 | #7 |
Anything Dboys/Boyi/Kalash (all the same) has pumped out recently is a part of the next generation of guns coming out of China, all with better build quality then their previous generations, definitely a good buy.
|
|
July 19th, 2009, 02:08 | #8 |
asexual lumbricus terrestris
|
DBoys internals are pretty dreadful... Although you can probably get away with using most of the parts.
|
July 19th, 2009, 02:34 | #9 |
Official ASC "Dumb Ass"
|
Dboys ak's ftw seriously
__________________
|
July 19th, 2009, 02:53 | #10 |
asexual lumbricus terrestris
|
As it turns out, not RS, CA, G&G, or TM... They're cheap, but then in order for it to be reliable you need to change the bushings, reshim, relube, and check for factory defects, and then probably change the rediculously short spring for a normal length one. Then you need to fix the HUGE airleaks by getting new o-rings, and a new nozzle.
Personally I don't trust mechbox shells that have been half heartedly sprayed black. |
July 29th, 2009, 07:31 | #11 |
Banned
|
I like Dboys very much too, they're more innovative than these Japanese manufacturers (5 releases of MP5s, 5 releases of M4A1s)?? And Dboys' price is very cheap and affordable compare to Japanese AEG prices. Dboys FTW!
|
|
Bookmarks |
|
|