|
|
September 9th, 2009, 22:01
|
#1 |
|
Slow mo.
|
SAS strike kit for Hi-Capa 4.3
I can't seem to find anything on the SAS front strike kit for the hi capa 4.3. Is that because it does not exist?
Here's a link a picture of it on a Hi-Capa 5.1. Last edited by Slono; September 9th, 2009 at 22:06.. Reason: added *Hi-Capa* in title |
|
|
|
September 9th, 2009, 22:40
|
#2 |
|
Official ASC "Dumb Ass"
|
THat kit is mounted by the 2 holes in the dust cover of the 5.1 frame, as far as I kno the 4.3 does not have these holes so I don't know how something like this would mount on a 4.3
__________________
|
|
|
|
|
September 9th, 2009, 22:51
|
#3 | |
|
I belive you have to mount it on a 5.1 with a 4.3 slide
__________________
Quote:
Chinese proverb
|
|
|
|
|
|
September 9th, 2009, 23:35
|
#4 | |
|
Official ASC "Dumb Ass"
|
Quote:
__________________
|
|
|
|
|
|
September 9th, 2009, 23:41
|
#5 | ||
|
|
Quote:
I though i read that somewhere on here. I can't think of another way you could make it would, Aren't the slides on high-capa 4.3s and 5.1s interchangable?
__________________
Quote:
Chinese proverb
|
||
|
|
|
|
September 9th, 2009, 23:47
|
#6 |
|
Official ASC "Dumb Ass"
|
The slide are interchangeable but that has nothing to do with it, the holes on he dust cover of the 5.1 are where the rail part goes and it extends pas the front of the slide and the 2nd part goes on the front of that, putting a 4.3 slide will leave a space of about an inch between the strike front and the end of the slide
look at a pic of a 4.3 and a 5.1 and you will understand
__________________
|
|
|
|
|
September 9th, 2009, 23:49
|
#7 | ||
|
|
Quote:
Thanks for the clarrification,
__________________
Quote:
Chinese proverb
|
||
|
|
|
|
September 9th, 2009, 23:49
|
#8 |
|
I'm sure you could tap the 4.3 frame to accept the Strike kit's front most plate's screws... or you might have to tap and fill the forward strike plate as well... I don't have one in front of me...
__________________
  Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur. |
|
|
|
|
September 9th, 2009, 23:54
|
#9 |
|
Official ASC "Dumb Ass"
|
U would also need to cut a bit off of the rail and reposition the screw holes on it in order to close the gap that the shorter slide would create
__________________
|
|
|
|
|
September 10th, 2009, 00:53
|
#10 |
|
Slow mo.
|
So I guess the short answer is, there is no 4.3 SAS strike kit. I appreciate everybody's input!
Last edited by Slono; September 10th, 2009 at 01:32.. |
|
|
|
|
September 10th, 2009, 01:26
|
#11 | |
|
Short answer is indeed YES.
The 4.3 SAS front kit IS available. http://www.tokyo-model.com.hk/ecshop/goods.php?id=3598 The following statement is also true. Quote:
__________________
Western Arms Infinity 6" Hybrid DX silver Limited Western Arms Infinity 5" Expert KSC MP7A1 KSC USP Match Kimber Warrior [Nova FMU kit] Kimber Gold Combat Stainless [Nova FMU kit] 
Last edited by lokisama; September 10th, 2009 at 01:29.. |
|
|
|
|
|
September 10th, 2009, 01:30
|
#12 |
|
Slow mo.
|
But you need a 5.1 gun base which means it doesn't really fit a 4.3 if you wanted install it on a stock 4.3 hi capa.
|
|
|
|
|
September 10th, 2009, 01:36
|
#13 |
|
|
You would need to source a 5.1 frame for your 4.3 capa.
starting with a 4.3 as a base would be the better choice for less parts to hunt down. Ask one of the guys who has all the shiny hicapas lol. They prolly have some left over.
__________________
Western Arms Infinity 6" Hybrid DX silver Limited Western Arms Infinity 5" Expert KSC MP7A1 KSC USP Match Kimber Warrior [Nova FMU kit] Kimber Gold Combat Stainless [Nova FMU kit]
Last edited by lokisama; September 10th, 2009 at 02:05.. |
|
|
|
|
September 10th, 2009, 01:49
|
#14 |
|
Slow mo.
|
How much do frames go for nowadays anyway? lol
|
|
|
|
|
September 10th, 2009, 01:55
|
#15 |
|
Official ASC "Dumb Ass"
|
here's a pic of mine, on a 5.1 slide
__________________
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
