|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 31st, 2010, 17:33
|
#1 |
|
WE SCAR flash hider
Hi guys, I have a very simple question, is the stock flash hider mounted clockwise or anti-clockwise? I tried on both side and it didn't move at all, but I didn't use to much strenght. Thank you
|
|
|
|
January 31st, 2010, 17:41
|
#2 |
|
mine is clockwise
__________________
|
|
|
|
|
January 31st, 2010, 17:45
|
#3 |
|
Division
|
I heard they come in both CCW and CW randomly... Mine was CW.
If you want to get your flash hider off you will need to soften up the thread locker by putting your front end into a flame. Easiest is so light a candle. Let it get warm until you smell or see smoke from the thread lock and it should easily twist off with minimal torque.
__________________
 Weee! |
|
|
|
|
January 31st, 2010, 17:56
|
#4 |
|
|
Ok I'll go for clockwise. If it still does not move, I'll heat the front end thank you
|
|
|
|
|
January 31st, 2010, 18:02
|
#5 | |
|
Can't fix my own guns. Willing to fix yours.
|
i had to put a screwdriver through the holes and crank on it to break the locktite that held it on
__________________
 Words to live by Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
