taking off ak handgaurd

[sarosh]

k so i got a tactical ak, and i need to take off the handgaurd. it has screws in the side that look like an allan key to unscrew them but no allan keys i have fit so i was wondering what i could use to take them off.
thanks

[Kokanee]

It depends on the make of the AEG; "Tactical" is not a brand.

Most likely you have a Kraken or some other TM knockoff, and you can take off the foregrip by;

1) Flip AEG upside down so you're looking at the bottom of the receiver;
2) Look at the barrel where the gas block sits, there will be a small phillips heads screw;
3) Unscrew; and
4) Slide the whole gasblock/tube assembly forward, you can now remove your foregrips.

[Forever_kaos]

Do what Kokanee said.

BUT, you may have to remove the faux cleaning rob first. To do that if it's there, at the very tip of the cleaning rob pull it up a pinch, and out. Or you'll figure it out.

[sarosh]

ok thanks for the info. and ya its a cyma btw