|
|
|
February 9th, 2010, 20:15
|
#1 |
|
Banned
|
how to hold a 12v battery
i am getting a systema gearbox requiring a 12v battery but i have an m4 with crane stock, is there any possible way to put a 12v on my gun other than getting a full stock?
|
|
|
|
February 9th, 2010, 20:21
|
#2 |
|
Official ASC Bladesmith
|
Mount the M4 onto a car?
 Sounds like two things: 1/ You made a bad choice in gearboxes to purchase; 2/ Good chance only a Li-Po battery in the 11.1V flavour is your best option. |
|
|
|
|
February 9th, 2010, 20:26
|
#3 | |
|
Quote:
|
|
|
|
|
|
February 9th, 2010, 20:29
|
#4 |
|
What gearbox requires a 12v batt? And Stalker had it right. Lipo would be your best bet with that one.
__________________
|
|
|
|
|
February 9th, 2010, 20:32
|
#5 |
|
get a king arm lipo 11.1volt battery i do have a 12 volt nimh intelec in my m4 and i can tell you 11.1 volt is about same thing even the li-po might offer a little bit more power.
BTW: if you got systema m170 gearbox you dont need to run a 12 volt battery but it's recomended ;P This battery fit in buffer tube, i do have 4 of these and they works pretty damn good. http://www.airsoftparts.ca/store2/in...oducts_id=1338
__________________
 Age verifier for Beauce region NIKON USER BEWARE ;P |
|
|
|
|
|
February 9th, 2010, 20:37
|
#6 |
|
Banned
|
yeah i got the systema m170 gearbox but put a m120 spring in it for my aeg, but the lipo battery wont fit in my stock, its the batteries that are 2 tubes connected with a wire it cant be a box, also if it doesnt have a 12v would it still run good? and i didnt make the wrong choice lol. i have a full stock to but i wanted to put on my crane stock
|
|
|
|
|
February 9th, 2010, 20:41
|
#7 |
|
Banned
|
whats the buffer tube?
|
|
|
|
|
February 9th, 2010, 20:42
|
#8 | |
|
Quote:
an 8.4V large will work. |
|
|
|
|
|
February 9th, 2010, 20:43
|
#9 | ||
|
Quote:
__________________
Quote:
|
||
|
|
|
|
February 9th, 2010, 20:45
|
#10 |
|
Banned
|
and the large 8.4 will work just as good as the 12v
|
|
|
|
|
February 9th, 2010, 20:46
|
#11 | |
|
Banned
|
Quote:
|
|
|
|
|
|
February 9th, 2010, 21:14
|
#12 | |
|
|
Shouldn't make a difference what stock you have. As its only the tube that is being switched out.
Also a 12V with a m120 spring may cause heavy damage to the gearbox if used on full auto. So a safer bet would be a 8.4V large battery, a 9.6V small/large battery or lipo.
__________________
Quote:
|
|
|
|
|
|
February 9th, 2010, 21:16
|
#13 |
|
Banned
|
ok, but it doesnt matter if its a m170 gearbox with m120 spring, i should still use a small 9.6 and work fine?
|
|
|
|
|
February 9th, 2010, 21:17
|
#14 |
|
Banned
|
but also my systema motor says use a 12v
|
|
|
|
|
February 9th, 2010, 21:20
|
#15 | ||
|
|
Quote:
But as far as the motor I have now Idea. What motor do you have so someone else that knows more than I do can help you out.
__________________
Quote:
|
||
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
