650mm barrel for AK?

[Love]

Hey guys. Refering back to one of my older posts about my 250mm silencer that I added to my AK47/Kraken. (I'm building an RML & M76 mix)

With the silencer added on, I would need an inner barrel of 705mm. (But they dont come in that size. Biggest is 650mm AFAIK.)

Would this MadBull 6.03mm TB 650mm innerbarrel work with my AK? http://www.airsoftparts.ca/store2/in...roducts_id=461

Is theyre any cheaper alternatives?

Also, if I am replacing the stock barrel with this, are there any other upgrades that I should do to my gun? Or would a longer barrel without any upgrades be fine? (If I recall correctly, putting a random upgrade part in a gun, can do more harm than good, if none of the other stuff is upgraded.)


/spoonfeed (You know, I love you all. Except you. *Points at tall person in crowd.*)

EDIT: Might aswell ask this too: Are there any AK47 Shorty Mags availiable?

[cerealmaniac]

not sure if anybody makes 700mm+ TB's. the madbull TB u posted on airsoftparts is a decent one(and pretty cheap one). with a longer barrel you should perhaps get a bore up kit. as for the shorty ak mags they're everywhere. most airsoft retailers online have them

[Love]

I havn't seen any shortmags online. Link please? (And yes, I'd rather order inside of canada, but I'll order internationally if I have to.)

Also, Pusangani cleared it up for me too. All barrels for AEG's are same, hopup rubbers too.

I see bore-up cylinder sets/kits for around $75 on airsoftparts. Good price?
(Bore-ups, are for pushing more air through the barrel right? I'd need it because the kraken gearbox isnt meant for a long barrel.)

[L473ncy]

Tokyo Marui makes a 250 round hi-cap AK shortmag as seen here http://www.combatdepot.com/product_i...0eeac93d65117c.

I haven't found any mid or low cap AK short mags however if you find some contact me, I'm interested in picking some up.

The only other way I'm thinking of involves a lot of work and may not actually work which is to take a standard length AK mag and cutting it down while modding the internals to work with the cut down mag. This probably involves a dremel, messing with the feeding track and messing with the spring. Like I said a lot of work for not too much gain and possibly destroying a mag in the process.

[Jagd]

Originally Posted by L473ncy

Tokyo Marui makes a 250 round hi-cap AK shortmag as seen here http://www.combatdepot.com/product_i...0eeac93d65117c.

I haven't found any mid or low cap AK short mags however if you find some contact me, I'm interested in picking some up.

I think there is none, I don't know why though, I keep seeing the hi cap one. No mid or low cap, one company should start making some they would sell like hot cakes!

[pusangani]

or get RS 5rd shorty mags, and put a TM shotgun shell in it, will need to remove the spring and follower and dremel to make it fit in the magwell - I've seen ANcorp do it.

*edit*
or find a retailer overseas that sells the K92B MPEG and ask them if the short mag that comes with it is a hicap or standard.

[cerealmaniac]

Originally Posted by Love

I havn't seen any shortmags online. Link please? (And yes, I'd rather order inside of canada, but I'll order internationally if I have to.)

Also, Pusangani cleared it up for me too. All barrels for AEG's are same, hopup rubbers too.

I see bore-up cylinder sets/kits for around $75 on airsoftparts. Good price?
(Bore-ups, are for pushing more air through the barrel right? I'd need it because the kraken gearbox isnt meant for a long barrel.)

http://lmgtfy.com/?q=airsoft+ak+short+magazine

a bore up cylinder set for $75 isn't that much. but then again u gotta ask yourself why ur going with a longer barrel....etc.

Originally Posted by L473ncy

Tokyo Marui makes a 250 round hi-cap AK shortmag as seen here http://www.combatdepot.com/product_i...0eeac93d65117c.

I haven't found any mid or low cap AK short mags however if you find some contact me, I'm interested in picking some up.

The only other way I'm thinking of involves a lot of work and may not actually work which is to take a standard length AK mag and cutting it down while modding the internals to work with the cut down mag. This probably involves a dremel, messing with the feeding track and messing with the spring. Like I said a lot of work for not too much gain and possibly destroying a mag in the process.

don't think there are any low/mid ak short mags. i've found only hicaps.

[coach]

short AK 250 rd high caps:

http://www.redwolfairsoft.com/redwol...il?prodID=9361
http://shop.ehobbyasia.com/jing-gong...ak-series.html
http://www.ebairsoft.com/rounds-meta...ne-p-1150.html

[Jagd]

Originally Posted by coachster

short AK 250 rd high caps:

http://www.redwolfairsoft.com/redwol...il?prodID=9361
http://shop.ehobbyasia.com/jing-gong...ak-series.html
http://www.ebairsoft.com/rounds-meta...ne-p-1150.html

Dude we keep saying that there is only Hi-caps Short mag, don't give us a link ... :banghead: Please read the thread before posting.

[Love]

Tempting but I dont want a wind wheel/rattling BB's. (plus some games dont allow highcaps.)

[Kokanee]

Originally Posted by L473ncy

...The only other way I'm thinking of involves a lot of work and may not actually work which is to take a standard length AK mag and cutting it down while modding the internals to work with the cut down mag. This probably involves a dremel, messing with the feeding track and messing with the spring. Like I said a lot of work for not too much gain and possibly destroying a mag in the process.

You mean like this?



It is actually quite easy to do, involved a small coping saw, no messing with the feed track and it was very simple to trim the spring. Very little work for a lot of gain

More here: http://redcossack.ca/blog/?page_id=117

[Love]

What kind of AK mag is that? :S

[coach]

Originally Posted by Jagdalex

Dude we keep saying that there is only Hi-caps Short mag, don't give us a link ... :banghead: Please read the thread before posting.

dude, I could care less.

I was gathering links prior to you posting, just so happens I hit reply starting typing and then got distracted.

[Love]

I do actually appreciate you posting those links Coach. If I have to go with the hicap shorty mag, I will. But just for asthetics.

[Shooting Addict]

Heres a 705mm barrel for ya
http://www.redwolfairsoft.com/redwol...l?prodID=23285